- その他のフルークグループ:
- Fluke
- Fluke Biomedical
- Fluke Networks
- Fluke Process Instruments
フルークブランドをさらに表示
優れた性能のコンパクトで丈夫な機器
- 独立した水晶振動式基準圧力トランスデューサー・モジュール（Q-RPT）と個別の自己防御システム（SDS™）（「特長」の下のQ-RPTモジュールの利点を参照）
- Infinite RangingとAutoRange™
- 差圧測定モード（チャンネル1 - チャンネル2）
- 15 kPa（2.2 psi）コンパウンドゲージQ-RPT、3 kPa（0.4 psi）未満までのターンダウン
- 外部基準測定装置としてPPC4に統合
- バッテリー/充電器パックを利用可能
- RPM4は、ハイエンドの性能に丈夫さと信頼性を組み合わせたRPMラインの伝統を受け継ぐ
- 安定度ベースの「準備完了/未完了」の指示
- 組み込みの液圧ヘッド補正
- ユーザー定義の圧力単位
- インテリジェントAutoZero™機能
- リモート[ENTER]スイッチ
- 大きな文字、読みやすい表示
- 12VDC電源とバッテリー・パック・オプション
- 外部バルブ・ドライバー
- RS-232およびIEEE- 488通信
- PCベースの再校正ユーティリティ・ソフトウェア付属
- 無償のLabVIEW®ドライバー
- 簡単な無償のフラッシュ・メモリを搭載
RPM4は単なる従来の圧力指示器ではありません。極めて低い圧力から280 MPa（40,000 psi）までの最高水準の性能 … 先進のオンボード機能… コンパクトで頑丈… 完全なローカルおよびリモート通信… RPM4は多様なハイエンドの圧力校正、テスト、測定アプリケーション用の完全なソリューションです。
こちらの製品については日本国内での窓口は株式会社大手技研となっております。
Infinite Ranging ™ and Auto Range ™
With Infinite Ranging, RPM4 offers unprecedented versatility in adapting to specific range operations. The easy-to-use autorange feature allows you to adapt and optimize the full functionality of your controller for a specific range with a simple keystroke or remote command string at the start of the test. Just enter the maximum pressure and measurement mode. Autorange does the following:
- Select and activate the best Q-RPT for the specified range and measurement mode.
- Set the pressure unit for measurement. Activates absolute pressure, gauge pressure, or compound gauge pressure measurements.
- Adjust the display resolution to the appropriate level of the range.
- Adjust the overpressure alarm according to the actual operating range.
- It reduces measurement uncertainty in proportion to the selected range (premium class Q-RPT only).
Note: RPM4's Infinite Ranging and Auto Range features are recommended for optimizing operations for a particular range, but are not required to achieve the "% reading" measurement specification.
SDS ™ Q-RPT Self-Defense System
All Q-RPT modules up to 7 MPa (1 000 psi) are equipped with a unique Self Defense System ™ (SDS). The SDS valve isolates and exhausts the module's Q-RPT when it is not in use or when overpressure is likely to occur. SDS allows all Q-RPT modules to remain connected at pressures up to 10 MPa (1500 psi) without the need for separation or disconnection.
Advanced onboard features
RPM4 has a variety of advanced onboard pressure data capabilities, including:
- Special data such as pressure mean over time, rate of change, high / low, freeze, deviation from setpoint.
- In differential pressure mode, the difference between the two Q-RPTs is measured directly, including the terling of line pressure.
- In parallel measurement, two Q-RPTs are combined into one and used in duplicate.
- Leak check measures the average rate of change in pressure over a user-set period.
- AutoTest automates calibration routines for load testing and logging data.
Crystal Vibration Reference Pressure Transducer (Q-RPT) Module
The outstanding pressure measurement specifications of RPM4 are made possible by Fluke Calibration's unique Crystal Vibration Reference Pressure Transducer (Q-RPT) module.
Q-RPT measures pressure by measuring the change in the natural oscillation frequency of the crystal caused by pressure. Each transducer is individually evaluated and characterized using a primary pressure standard for use in the Q-RPT module. Only transducers that show the required level of linearity, reproducibility, and stability are selected. A unique compensation model born from over 15 years of experience with thousands of crystal vibration pressure transducers is applied to optimize the measurement characteristics required for transfer standards. You can use standard and premium class Q-RPT modules that best suit your performance and budget requirements.
The unique dynamic compensation of the atmospheric pressure system uses an independent onboard barometer to seamlessly switch between absolute pressure, gauge pressure and compound gauge pressure modes at any time. Absolute errors and drift over time do not contribute to measurement uncertainty, as barometers are only used to measure small fluctuations in atmospheric pressure that occur during gauge pressure mode operation. The Q-RPT module has the following advantages:
- % Reading uncertainty and autorange span turndown available
- Ignore startup time
- No dependence on gas type
- Crystal element isolated from test medium
- Low sensitivity to direction
Q-PRT and range
|
Name of Q-RPT |
SI version |
US version |
Supported measurement modes |
Liquid used |
SDS TM self-defense system |
||
| Maximum range [kPa] Absolute pressure | Maximum range [kPa] gauge pressure | Maximum range [psi] Absolute pressure | Maximum range [psi] gauge pressure | ||||
| A280M-L | 280 000 | 280 000 | 40 000 | 40 000 |
Absolute pressure, gauge pressure, compound gauge pressure |
Gas standard |
None |
| A200M-L | 200 000 | 200 000 | 30 000 | 30 000 | |||
| A140M-L | 140 000 | 140 000 | 20 000 | 20 000 | |||
| A100M-L | 100 000 | 100 000 | 15 000 | 15 000 | |||
| A70M | 70 000 | 70 000 | 10 000 | 10 000 |
Gas standard |
||
| A40M | 40 000 | 40 000 | 6 000 | 6 000 | |||
| A20M | 20 000 | 20 000 | 3 000 | 3 000 | |||
| A14M | 14 000 | 14 000 | 20000 | 20000 | |||
| A10M | 10 000 | 10 000 | 1 500 | 1 500 |
Equipment |
||
| A7M | 7 000 | 7 000 | 1 000 | 1 000 | |||
| A3.5M | 3 500 | 3 500 | 500 | 500 |
Gas only |
||
| A2M | 20000 | 20000 | 300 | 300 | |||
| A1.4M | 1 400 | 1 400 | 200 | 200 | |||
| A700K | 700 | 700 | 100 | 100 | |||
| A350K | 350 | 250 | 50 | 35 | |||
| A200K | 200 | 100 | 30 | 15 | |||
| A160K | 160 | 60 | twenty three | 8 | |||
| A100K | 110 | Ten | 16 | 1.5 | |||
| BA100K 1 | 110 |
--- |
16 |
--- |
|||
| G200K |
--- |
200 |
--- |
30 |
Gauge pressure only |
||
| G100K |
--- |
100 |
--- |
15 | |||
| BG15K 2 |
--- |
15 |
--- |
2.2 | |||
| G15K |
--- |
15 |
--- |
2.2 | |||
1 BA100K is a low point barometer of 70 kPa (10 psia).
2 BG15K is a bidirectional gauge from -15 to +15 kPa (-2.2 to 2.2 psi).
Compatible with PPC4 automatic pressure controller
RPM4 can be used as a fully automatic pressure controller / calibrator, an external reference pressure measuring device for Fluke Calibration's PPC4. You can "daisy chain" one or two RPM4s to the PPC4 with a 9-pin RS232 cable. RPM4's Q-RPT becomes part of the PPC4 system and can be transparently managed by the user from PPC4. There is only one test connection for full range operation of the PPC4 system.
This point of contact in Japan for products Co., Ltd. a leading Giken has become.
General |
|
| Power supply specifications | 85-264 VAC, 50/60 Hz, up to 25 VA and 12 VDC @ 9 Ahr |
| Battery Charger: | 100-240 VAC, 50/60 Hz |
| Standard operating temperature range | 15-35 ° C |
| vibration | Compatible with MIL-T-28800D |
| Weight (typical value) | 5 kg (11 lb) |
| Size | Height 10 cm x Width 22.7 cm x Depth 24 cm (3.9 in x 8.9 in x 9.5 in) |
| Battery Charger: | Height 8 cm x Width 22.5 cm x Depth 20 cm (3.1 in. X 8.9 in x 7.9 in) |
| Communication port | RS232 (COM1, COM2), IEEE-488.2 |
| action mode | Absolute pressure, gauge pressure, compound gauge pressure, differential pressure |
| Pressure range | Vacuum ~ 280 MPa (40,000 psi) |
| Liquid used | Q-RPT less than A7M: Gas only and everything else: Gas or oil |
| Proofreading | A2LA certified calibration report attached |
| Pressure connection piping | Up to A70M: 1/8 in NPT F A70M and above: DH500 (equivalent to AE250C) |
| CE mark | Available (requires specification) |
Measured pressure (Q-RPT) |
|
| Warm up time | コールド起動からは30分の温度安定時間を推奨 |
| 分解能 | 最大1 ppm、ユーザー調節可能 |
| 1 年間の予測安定度1 | すべてのレンジおよびクラスで読み値の± 0.005 |
| 確度 2 | A10M（1,500 psi）までのQ-RPT |
| 標準クラス： | 読み値の ± 0.008 %、読み値の ± 0.005 %、または Q-RPT スパンの 0.0024 % のいずれか大きい方4 |
| プレミアム・クラス： | 読み値の ± 0.005 %、オートレンジ・スパンの読み値の ± 0.0015 %、または Q-RPT スパンの 0.0005 % のいずれか大きい方5 |
| 測定の不確かさ 3 | A10M（1,500 psi）までのQ-RPT |
| 標準クラス： | 読み値の ± 0.010 % または Q-RPT スパンの 0.0030 % のいずれか大きい方4 |
| プレミアム・クラス： | 読み値の ± 0.008 %、オートレンジ・スパンの 0.0024 %、または Q-RPT スパンの 0.0007 % のいずれか大きい方5 |
| 確度 2 | A14M～A140M（2,000～20,000 psi）のQ-RPT 読み値の± 0.012%またはQ-RPTスパンの0.0036%のいずれか大きい方4 |
| 測定の不確かさ 3 | A14M～A140M（2,000～20,000 psi）のQ-RPT 読み値の± 0.013%またはQ-RPTスパンの0.0039%のいずれか大きい方4 |
| 確度 2 | A200MN～A280M（30,000～40,000 psi）のQ-RPT 読み値の± 0.015%またはQ-RPTスパンの0.0045%のいずれか大きい方4 |
| 測定の不確かさ 3 | A200MN～A280M（30,000～40,000 psi）のQ-RPT 読み値の± 0.018%またはQ-RPTスパンの0.0054%のいずれか大きい方4 |
- AutoZero機能の定期使用を想定した場合の予測年間安定度リミット（k=2）。AutoZを使用しない絶対圧モードの予測年間安定度は±（Q-RPTスパンの0.005% + 読み値の0.005%）。A200MN～A280M（30,000～40,000 psi）のQRPT。
- 直線性、ヒステリシス、再現性を組み合わせた値。オンボード圧力計の分解能と短期安定度については、Axxx Q-RPTを使用したゲージ圧モードで± 1 Pa（0.00015 psi）を追加します。
- 精度、年間予測安定度、温度効果、校正の不確かさをISO「Guide to the Expression of Uncertainty in Measurement」に従って拡張（k=2）し組み合わせた場合の、印加圧力の真値からのQ-RPT指示値の最大偏差。
- Q-RPTスパンの100～30%では、読み値の%に測定圧力を掛けた値。Q-RPTスパンの30%では、読み値の%にQ-RPTスパンの30%を掛けた値。たとえば、QRPTが標準A160Kの場合、圧力測定の不確かさは、48 kPa（160 kPaスパンx 30%）までは0.010%に測定圧力を掛けた値、48 kPa未満では0.0048 kPa（160 kPaスパンx 30% x 0.01%）です。
- At 100-30% of the autorange span, the reading is% multiplied by the measured pressure. Below 30% of the autorange span, the reading% is multiplied by 30% of the autorange span. If the autorange span is less than 30% of the maximum Q-RPT span, then% of the reading is multiplied by the measured pressure, or% of the reading is multiplied by 9% of the Q-RPT span, whichever is greater. .. For example, if the Q-RPT is premium A160K and the autorange span is 160 kPa, the uncertainty of pressure measurement will be the measured pressure x 0.008% up to 48 kPa (160 kPa autorange span x 30%). Less than 48 kPa is 0.0038 kPa (160 kPa span x 30% x 0.008%). When the autorange span is 100 kPa (greater than 30% of the maximum Q-RPT span of 160 kPa), the uncertainty of pressure measurement is the measured pressure x up to 30 kPa (100 kPa autorange span x 30%). It is 0.008%, and less than 30 kPa is 0.0025 kPa (100 kPa span x 30% x 0.008%). When the autorange span is 30 kPa (less than 30% of the maximum Q-RPT span of 160 kPa), the uncertainty of pressure measurement is measured pressure x 0.008 up to 14.4 kPa (160 kPa autorange span x 9%). If it is less than 14.4 kPa, it will be 0.0012 kPa (160 kPa maximum Q-RPT span x 9% x 0.008%).
This point of contact in Japan for products Co., Ltd. a leading Giken has become. Click here for the Japanese data sheet .
| アクセサリ | 詳細 |
|---|---|
| バッテリー・パック/充電器 |
12 V DCバッテリー、充電器付き |
| ラック・マウント・キット |
ラック・マウント・キット、標準19 in ラック用 |
| フット・スイッチ |
リモート[ENTER]フット・スイッチ（部品番号3070940） |
| MPC1-3000 |
手動操作によるガス圧力コントローラー、真空から20 MPa（3,000 psi）までの圧力レンジ |
| MPC1-1000 |
手動操作によるガス圧力コントローラー、真空から7 MPa（1,000 psi）までの圧力レンジ |
| GPC1-16000 / GPC1-10000 |
ガス圧力コントローラー |
| MPG1-200M 402122 |
手動油圧式ジェネレーター/コントローラー、200 MPa（30,000 psi） |
| MPG2-H |
手動油圧式ジェネレーター/コントローラー、200 MPa（30,000 psi） |
| OPG1-30000 |
油圧式ジェネレーター - 内容： 1 qt セバシン酸ビス（2-エチルヘキシル）（合成潤滑油）、PG7302またはRPM4用外部チューブ/アダプター、操作および保守マニュアル |
| PK-7000-PPC/MPC |
相互接続キット - PG7102を PPCまたはMPC圧力コントローラー、および被試験装置に接続します。 |
| アプリケーション・ノート |
|---|
Guide to Determining Pressure Measurement Uncertainty for Q-RPT Based Products (1.35 MB) |
|
How to calibrate reference pressure transducers with COMPASS® for Pressure Software (4.31 MB) |
| データ・シート |
|---|
|
RPM4 BA100K Reference Pressure Barometer Data Sheet (3.15 MB) |
|
RPM4 Reference Pressure Monitor Data Sheet (1.91 MB) |
|
RPM4-LP Low Pressure Monitor Data Sheet (1.76 MB) |
| ソフトウェア |
|---|
| COMPASS for Pressure Calibration Software Download/Upgrade |
| ファームウェア |
|---|
| RPM4 v1.01I Embedded Software |
| RPM4-AF v1.00b Embedded Software |
| インストラクション・シート |
|---|
|
//m™ Connector Bloc for RPM4™ Installation Instructions (152.96 KB) |
|
Interconnection Kit For MPG1 with RPM4 or PG7302 Instruction Sheet (94.59 KB) |
|
RPM T-Box Instruction Sheet (70.71 KB) |
| LabView ドライバー |
|---|
| LabVIEW Drivers, Pressure and Flow Calibration Products |
| フリー・ユーティリティ |
|---|
| CalTool for RPTs Free Utility |
Sidebar Request a Quote
見積依頼フォーム
サイトの改善のため、フィードバックをお寄せください。