• その他のフルークグループ:
  • Fluke
  • Fluke Biomedical
  • Fluke Networks
  • Fluke Process Instruments
フルークブランドをさらに表示
Accelix Amprobe Beha-Amprobe Comark Emaint Landauer Pacific Laser Systems Pomona RaySafe Schad
ホーム
Precision, Performance, Confidence.
フルーク・キャリブレーション - Fluke Calibration Japan
  • 登録
  • ログ・イン
  • Contact Us

JP - Japanese (日本語) [Change]

 

Don’t get fooled: what to look for when buying an isothermal bath

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. You might only be able to find a performance spec for a single temperature point, not for the bath’s whole temperature range. Or they don’t say which bath fluid was used in testing.
 
An isothermal calibration bath is a significant investment so you need to get enough information – and the right information – to help you make the best decision. Here are four key specifications to evaluate:

Temperature range and bath fluids

Often no one bath fluid will work well over an isothermal bath’s entire temperature range. For example, a Fluke Calibration 7341 Deep-Well Compact Bath has a range from -45 °C to 150 °C. Below 0 °C Ethanol is a good fluid, but you’d need another fluid, like silicone oil, at temperatures above that. If you need to cover your bath’s full temperature range, you’ll want to decide between changing bath fluids or using more than one bath unit.

Stability

When a bath maintains a constant temperature over time, we say it is stable. Stability varies at different temperatures but some suppliers only give out one spec at or near ambient, and they don’t mention that it only applies to one temperature or a narrow range. Be sure you understand a bath’s stability over the entire temperature range that you care about.
 
You also need to ask what fluid the manufacturer used when they defined the stability specification, because bath fluid affects stability. For example, at 37 °C a bath is more stable with water as the fluid. If you use oil, you can expect somewhat more instability, and if that oil has high viscosity at 37 °C you can expect even greater degradation.

Uniformity

A bath must be the same temperature throughout the test zone where you’ll make your measurements. The uniformity specification defines the peak value for this error source. The more probes you test, the larger the test zone – and the more important uniformity becomes.
 
Uniformity depends mostly on the way the bath fluid is mixed. Does the bath use a circulator pump for mixing? If so, are there thermal flow patterns in the bath that interfere with uniformity? Check both the vertical and horizontal temperature gradients.

Tank size

How many probes and sensors do you need to calibrate? If your workload is large, you may want to look for an isothermal bath with a large tank size.  What about the length of your sensors? Longer SPRTs, PRTs and liquid-in-glass thermometers require a bath with plenty of immersion depth. What about oddly-shaped sensors? If you are calibrating tri-clamp sanitary sensors, for example, you should look for a bath that accommodates them (by the way, we make baths like that: the 6109A and 7019A Portable Calibration Baths).
 

Would you like more details about choosing an isothermal or temperature calibration bath?

You’ll find them here:
Buying the right temperature calibration bath for your laboratory application note
Tips for Selecting and Using Bath Flukes on-demand webinar
How to select a calibration fluid application note
 
You can also get live help from one of our isothermal bath application experts who will help you evaluate specifications to ensure you’re covered.
 
Speak with an expert

Steve Potter, Global Marketing Manager at Fluke Calibration
Posted by Steve Potter on 3月 20, 2018
Steve Potter is the Global Marketing Manager for Temperature Calibration products. His responsibilities include go-to-market strategy and coordination with regional teams worldwide, new product introductions, brand awareness, product promotion, and content development. He is a graduate of Brigham... Full Bio
  • ログイン(登録)してコメントを投稿
  • Printer-friendly version »
  • ホーム
  • 製品
    • 新製品情報
    • 電気校正
      • 電気標準器
      • 電気校正器
      • ベンチ・マルチメーター
      • 電気校正ソフトウェア
    • RF 校正
      • RF リファレンス・ソース
      • RF 校正アクセサリー
      • RF 校正ソフトウェア
    • データ収集とテスト装置
      • ベンチ・マルチメーター
      • データ収集
      • ファンクションおよび波形ジェネレーター
      • データ収集ソフトウェア
    • 温度校正
      • ITS-90 温度標準器
        • ITS-90 定点セル
        • 標準白金抵抗温度計(SPRT)
        • メンテナンス装置
        • 液体窒素式比較校正装置
        • 抵抗ブリッジ
        • 標準抵抗器
      • 校正バス
        • 小型校正バス
        • 標準バス
        • 特殊アプリケーション用バス
        • バス用アクセサリー
        • バス・コントローラー
        • バス用温度媒体
        • カスタム温度校正バス
      • 工業用温度校正器
        • フィールド・メトロロジー・ウエル
        • メトロロジー・ウェル
        • ハンドヘルド・ドライウェル校正器
        • フィールド・ドライウエル
        • 超小型バス
        • 赤外線校正器
        • 熱電対炉
        • デュアル・ブロック・ドライウエル
        • ゼロ点ドライウエル
      • プローブ/センサー
        • 白金抵抗温度計 (PRT)
        • サーミスター
        • 標準熱電対
      • デジタル温度指示計
      • マルチファンクション校正器
      • 温度校正ソフトウェア
    • 湿度校正
      • 湿度校正器
      • 湿度データ・ロガー/モニター
    • 圧力校正
      • ピストン・ゲージ
        • NMI ピストン・ゲージ
        • 絶対圧ピストン・ゲージ
        • 高圧力ガス・ピストン・ゲージ
        • 油圧式ピストン・ゲージ
        • ピストン・ゲージ用アクセサリー
      • 圧力コントローラー/校正器
        • 低圧力コントローラー/校正器
        • 空気式圧力コントローラー/校正器
        • 高圧空気式コントローラー/校正器
        • 油圧式コントローラー/校正器
      • 圧力モニター
        • 低圧力計
        • デジタル圧力計
        • 基準圧力モニター
      • 重錘形圧力計
        • 空気式デッドウェイト・テスター
        • 油圧式デッドウェイト・テスター
        • 液圧式デッドウェイト・テスター
        • 高圧油圧式デッドウェイト・テスター
        • デッドウェイト・テスター用アクセサリー
      • 手動校正器、モニター
        • 圧力校正器
        • 空気圧の制御
        • 液体圧比較器/ポンプ
      • Handheld Pressure Calibrators
      • エア・データ・テスト
      • ラボ環境モニター
      • 圧力校正アクセサリ
      • 圧力校正カスタム・システム
      • 圧力校正ソフトウェア
    • 流量校正
      • 気体流量標準器
      • 気体流量アクセサリ
      • GFS 質量流量一次標準
      • 流量校正ソフトウェア
    • プロセス校正ツール
      • 温度校正器
        • ハンドヘルド温度校正器
        • ドライブロック校正器およびマイクロバス
        • 高精度デジタル温度計
        • 温度プローブ
        • 赤外線温度計校正器
        • データ・ロギング機能付き湿温度計
      • 圧力校正器
        • デジタル圧力校正器
        • ハンドヘルド圧力校正器
        • 重錘形圧力計
        • 高精度デジタル圧力計
        • 校正用ハンド・ポンプ
      • マルチファンクション校正器
      • mA ループ校正器
      • プロセス校正ソフトウェア
    • 校正ソフトウェア
      • MET/CAL ソフトウェア
      • MET/CAL Support
      • 資産管理ソフトウェア
      • 温度校正ソフトウェア
      • 圧力校正ソフトウェア
      • 流量校正ソフトウェア
      • 機械/寸法校正ソフトウェア
    • サービスとサポート
    • すべての校正機器
  • ご購入について
    • 購入窓口
    • 見積依頼
    • デモ依頼
    • 相談/問い合わせ
    • Certified Pre-Owned Equipment
    • General Services Administration (GSA)
    • Financing Program
    • National Stock Numbers (NSNs)
    • Payment Options and Tax Info
  • ニュース
    • プレスリリース
    • プロモーション
    • 業界リンク
    • Metrology Salary Survey
  • トレーニングとイベント
    • 展示会/セミナー
    • トレーニング・コース
    • User Group Meetings
    • ウェブセミナー
      • ライブ・セミナー
      • 過去のセミナー(アーカイブ)
  • カタログ・資料
    • Education Hub
    • About Calibration
    • 参考資料
    • 製品資料
    • 製品マニュアル(ユーザー・ガイド)
    • Videos and Virtual Demos
    • Blog
  • サービスとサポート
    • Service Request (RMA)
    • Service Plans
    • ナレッジベース
    • 認定校正
    • サービスセンター
    • Calibration Certificates
    • Community Forum
    • My MET/SUPPORT
      • Activate
      • Procedures
      • Software
      • Technical Bulletins
      • Priority Support
      • Manuals
    • 製品マニュアル(ユーザー・ガイド)
    • 製品の登録
    • 安全データ・シート(SDS)
    • 安全性および製品に関するお知らせ
    • ソフトウェア・ダウンロード
  • フルーク・キャリブレーション
    • お問い合わせ先
    • 所在地
    • キャリア
    • フルーク・キャリブレーションとは
      • Hart Scientific:温度校正
      • DH Instruments:圧力/流量校正
      • Pressurements:圧力校正
      • Ruska:圧力校正
    • 関連企業
    • 行動規範とコンプライアンス
    • よくある質問
ホーム|Blog|Don’t get fooled: what to look for when buying an isothermal bath

サイトの改善のため、フィードバックをお寄せください。
フィードバック・フォーム≫
©1995-2021 Fluke Corporation
             

Secondary menu

  • 免責事項
  • プライバシー・ステートメント
  • ウェブマスター
  • Terms of Use
  • Terms and Conditions of Sale